Like all other massage chairs, the Medical Breakthrough Massage Chairs are also shipped in pieces because of their size. They get shipped in two boxes: the main body and the armrest box. But unlike most massage chairs, they are very easy to assemble. In fact, I would say that the Medical Breakthrough Massage Chair Assembly is the easiest you can ever imagine.
Armed with a manual, you don’t need more than a general know-how. Just have two people to help you in unpacking the main body, read and digest the manual, and you are all set.
How to Assemble
Medical Breakthrough Assembly is very easy. Just follow a few simple steps and voila, you are good to go. The summary breakdown of the installation is as follows:
First, unpack the main body with the help of your two helpers. The main body box of the Medical Breakthrough Massage Chair 7 contains the main body, leg part, pillow, and accessory box. After this, you unpack the armrest box: armrest (right), armrest (left), base cover (right), and base cover (left).
When all parts are out, reset the main body. Then, connect the power cord and remote controller. Turn on the switch located at the lower back, and press the power button twice, with a 30 second interval. This, will make the main body return to the reset position which is the original position.
Install the wheels. Place the wheels in the iron tubes which are located at the lower back of the main body and then screw them tight.Install the lining iron of the leg part: use dowels to fix the front part, and fix the back part to the push rods the same way. Connect to the seat frame after and fix with screws tightly.
Connect the leg part: connect the power cord and air hose to the main body.
Hook the leg part to the leg part adapter on the main body, and fix them together with pins and blockers. Zip up the leather between the leg parts and cushion after.
Fix the bottom of the base cover to the base frame of the main body. Tighten with screws.
Install armrest: lift up the front part, the fix the side parts to the axis of the main body. Pull the spring hook and strongly push in to fix well. Set the armrest closely to the main body, and insert the card into the intermediate shaft of the body from top to bottom, slowly.
Connect the air hose and power cord to the main body. Finally, insert the fixed block into the fixed axis of the main body, top to bottom. Make sure it is done correctly.
After this, you connect the connecting line of the remote control to the main body.
Then lay the back cushion flat on the main body and then, you zip it up.
Confirm all has been fixed well and tightly before usage.
It is recommended that you have about 10cm of space from the back to the wall or any other object. You should also allot 25cm from the front. Before using, also ensure that the power cord isn’t knotted or entangled and not under the main body. And also, to protect the floor from scratching, you can lay a blanket or carpet to shield the floor.
But if you feel that the stress of installing the chair is too much for you or just gets above your head, then we have a good news. You can request a technician to be sent to your home by the company to help you install it, or you can call a well-trusted technician you know around. It’s really easy and anyone can do it.
Commentaires